RS-232/485/422 to Single-Mode Fiber Optic Converter



Transmission distance: 20km
Point to point or loop circuit (point to multi-point) connection
Supports RS-232, RS-422, RS-485 asynchronous protocol
RS-232, RS-422/485 working at the same time
Supports 2 bits (half-duplex) & 4 bits (full-duplex) RS-485 operating mode
Transmission rate: 460kbps max
With optional SC, FC, ST interface
Supports master-slave working mode
Slave mode: can be used as Hub


Add to cart
Buy Now

Product Description

The ONSITE-SP-SM fiber optic modem supports asynchronous RS-232/485/422 communication. It is the best choice to connect the remote terminal unit (RTU) with the HOST or SCADA controller. It supports RS-232/485/422 asynchronous protocols; it can be mixed and matched to use 2 RS-232, RS-485 or RS-422 ports, and it supports 2 wires (half-duplex) RS-485 and 4 wires (full-duplex) RS-422 mode. The RS-485 mode supports data transmission (TXD or SD) control, this enhances the adaptation to most of the software. Optic fiber MODEM supports lots of optic connections between asynchronous serial ports. It supports 2 asynchronous serial devices to communicate under full-duplex or half-duplex via optic fiber; the communication distance can be as far as 4km at multimode, and 20km in single mode. The fastest transmission rate for RS-232 can be 115.2Kbps, and for RS-485/422 can be 460Kbps. Ports with different electronic standards can be mixed and matched to use; it is without problem to connect RS-232 devices with RS-485/422 devices. This is a good replacement of RS-232 to RS485/422 converter, which with EMI/RFT features.

The ONSITE-SP-SM supports two signal data transmission: transmit and receive data. At the same time, it is with RS-485/422 data transmission auto control circuit; Zero delay conversion; all the serial ports is connected via terminal block.

Reviews (0)


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.